Internationalized Thermal Printer: Supports Multiple Languages, Massive Character Sets I. The first step to get the tool 1、Sweep the code to get our printer tool 2、 USB connect the printer and computer, boot Open Tools→Other Settings→Select Language→Click to confirm   Ⅱ. Other language settings First select the character and click confirm, then select the corresponding character set.     Ⅲ. How to check the current character set voice In windows search bar cmd mode, enter the command: chcp As shown below, my active code page is 936, which means “China - Simplified Chinese (GB2312)”.     IV. Character set languages: you can find your own corresponding...

After connecting the machine to the computer via USB cable Use our printer test tool in the boot state (continuously updated) Scan the code to download   I. Modify IP Router auto-adaptation on state, plug directly connected to the router cable, the printer will be automatically adapted to the current router, and pop-up current IP address. Enter the address to connect to the printer. If you need to modify the IP needs to be closed, and then modify. 1. Network port version   2.WiFi version   Ⅱ.Sound and light alarm configuration 1. (Both sound/light can be turned off individually) Adjustable volume, sound.   III. Buzzer setting/blanking a few lines before cutting paper   IV. Set the common language 1、Directly select the corresponding language can be, as shown in the figure. (non-list of other languages need to select ASCII, and...

When you buy a new printer or replace the router, whether to set the IP cumbersome steps and troublesome, now the new version to solve a major problem of setting ip. The specific operation is as follows:   I. After the printer is connected directly to the router through the network cable and then plugged into the power on, the printer will pop up the current ip address. (Note that the printer needs to be connected to the router before powering on)     II. The printer needs to be upgraded to firmware version 5.9 or above.  (Please get the latest firmware in the main interface of the public number) This update firmware Scan the QR code below to download Firmware 5.9   Firmware version 5.9 audible and visual alarms...

Ⅰ.Small program mating Step 1: Print the self-test page (turn off the machine, turn on the same time press and hold down the paper out button for about three seconds ) Step 2: manually enter the distribution mode (shut down, turn on while holding down the paper out button until the printer makes a long drop sound and the green light flashes rapidly indicating success) Step 3: Cell phone connected to WiFi, scan the self-test page below the QR code to enter the WiFi password to match the network (green light flashes slowly indicates success) 2、Tools to match the network (USB cable connected to the computer and printer) Open the tool → WiFi settings → enter the WiFi name, password Click ok.   3、Mobile phone app network allocation (download software EspBlufi) Turn on the Bluetooth on your cell phone, open the software EspBlufi → Select the...

I. Printer tools   II. Printer drivers   III. Printer firmware  1. USB, USB + Bluetooth, USB + WiFi; these three versions with this firmware 5.4   2. USB + network port, USB + network port + sound and light alarm; these two with firmware 6.0